Define the purpose
We establish what work is proposed, which areas are accessible and whether the inspection needs to be management-focused or intrusive.
IDENTIFY BEFORE YOU DISTURB
Asbestos Surveys, Sampling and Testing Auckland
A survey helps establish whether materials that may be disturbed contain asbestos. This is particularly important before renovation, maintenance or demolition in older buildings. PropertyHelp Ltd can inspect suspected materials, arrange representative samples for analysis by an appropriate laboratory and provide practical information to help plan the next step. The survey scope must match the purpose of the work.
WHAT WE CAN ASSESS
A survey matched to the work you are planning.
A targeted sample answers a question about one material. An asbestos survey goes further by inspecting the agreed areas, recording suspected materials and their condition, arranging laboratory analysis where required, and reporting findings and limitations for the next stage of work.
OUR APPROACH
From survey scope to clear findings.
Inspect the site
Suspected materials are recorded with their location, condition and relationship to the planned work.
Sample appropriately
Representative samples are collected using controls suited to the material and sent to an appropriate laboratory for analysis.
Report the findings
Results are matched to the sampled locations and practical recommendations are provided for management or removal planning.
SITE-SPECIFIC DETAILS
What can affect the job.
The planned work determines the survey scope. Access restrictions, concealed materials and the number of different products can affect inspection time, sampling and laboratory turnaround. The report states what was inspected and any limitations.
- No survey can confirm inaccessible or concealed materials that were outside its scope
- Demolition and major refurbishment usually require a more intrusive survey
- Laboratory turnaround affects reporting time
- Sampling should not be attempted casually by an untrained person
COMMON QUESTIONS
Helpful answers before you begin.
Can you identify asbestos just by looking?
Some products look characteristic, but visual inspection alone cannot reliably confirm asbestos. Laboratory analysis is needed for confirmation.
How many samples will I need?
That depends on the number of different materials, their locations and whether they are likely to be the same product. We define the proposed sampling scope first.
Is a survey the same as a clearance?
No. A survey identifies or assesses suspected material. A clearance inspection follows removal work and must be undertaken by an appropriately independent competent person when required.
Important: Do not drill, sand, cut, scrape or break suspected asbestos. If material is damaged, keep people away and seek competent advice.
GET A CLEAR SCOPE
Tell us about the property.
Send the property address, approximate building age, planned renovation or demolition work, photographs and your preferred timeframe. We will explain the appropriate inspection and sampling scope.
Contact PropertyHelp Ltd
Speak with John about your asbestos survey in Auckland or Waikato.